News Center

Home / News Center / Industry News / What is the process of laminating cardboard materials with Cardboard Laminating Machine?

What is the process of laminating cardboard materials with Cardboard Laminating Machine?

2024-02-18

The process of laminating cardboard materials with a Cardboard Laminating Machine includes several steps to apply a protective or decorative layer onto the surface of the card. Here's a detailed explanation of the standard lamination procedure:

Preparation of Cardboard Materials:

The process starts offevolved with getting ready the card materials so as to undergo lamination. These substances may additionally encompass cardboard sheets or rolls of varying thicknesses, sizes, and features.

Adhesive Application:

The cardboard laminating device capabilities an adhesive utility machine liable for making use of the adhesive onto one or each surfaces of the cardboard material. The form of adhesive used can range primarily based on the preferred lamination final results and application necessities.

Feeding the Cardboard Material:

Once the adhesive is applied, the cardboard cloth is fed into the laminating system. Depending at the gadget's design, the card can be fed manually or robotically into the lamination chamber.

Heating and Pressure Application:

Inside the laminating device, the adhesive-covered cardboard material passes through heating and strain utility mechanisms. These mechanisms are designed to set off the adhesive and ensure right bonding among the adhesive layer and the card floor.

Lamination Process:

As the adhesive-lined cardboard cloth movements via the laminating machine, it undergoes the lamination manner. This usually involves the following levels:

Heating: The adhesive is heated to its activation temperature, which lets in it to turn out to be cheesy and bond effectively with the card surface.

Pressure Application: Concurrently, strain is applied to the adhesive-lined cardboard cloth to make certain uniform bonding and cast off air bubbles or wrinkles.

Cooling: After the lamination is whole, the laminated cardboard cloth might also skip through a cooling segment inside the machine to solidify the adhesive and ensure a smooth, flat finish.

ZNFH-1200/ZNFH-1300 Automatic Cardboard Laminating & Coating Machine

Trimming and Cutting (Optional):

Depending on the desired final product, the laminated cardboard cloth may additionally go through additional trimming or reducing procedures in the laminating system or in a separate completing station. This step guarantees that the laminated cardboard sheets or rolls are cut to the favored length and form.

Finished Product Output:

Once the lamination process is complete and the laminated cardboard substances skip high-quality manage assessments, they're ready for output. Depending on the production setup, the completed laminated cardboard sheets or rolls can be stacked, packaged, or further processed for downstream applications.

Share news

What factors should you consider when choosing an adhesive for Cardboard Laminating Machine lamination?

How often does the positioning system of the Positioning Sheet Cutting Machine need to be calibrated, and what factors may require recalibration?

Products
of interest